12V 100Ah Group 31 LiFePO4 Battery for Trolling Motors
$169.00
The 12V 200Ah LiFePO4 RV Battery stores 2560Wh of energy for RV, camper van, marine and off-grid power systems. A 200A Smart BMS supports higher-current DC loads, while Bluetooth monitoring gives installers and users direct access to key battery information from a compatible mobile app.
This standard-size 200Ah platform is intended for repeat installations where consistent electrical specifications, terminal layout and enclosure dimensions matter. Factory-direct wholesale, OEM and private-label supply are available for RV manufacturers, distributors and system integrators.
12.8V | 200Ah | 2560Wh | 200A Smart BMS | Bluetooth Monitoring | Low-Temperature Protection
With 200Ah of rated capacity at 12.8V, the battery provides 2560Wh of nominal energy in one enclosure. It can supply lighting, refrigeration, pumps, electronics and suitably sized inverter loads without the routine watering and maintenance associated with flooded lead-acid batteries.
| Parameter | Specification |
|---|---|
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Nominal Voltage | 12.8V |
| Rated Capacity | 200Ah |
| Nominal Energy | 2560Wh |
| Battery Management | 200A Smart BMS |
| Continuous Discharge Current | 200A |
| Maximum Continuous Output | 2560W at nominal voltage |
| Monitoring | Bluetooth mobile app |
| Low-Temperature Protection | Included; refer to the current datasheet for cut-off and recovery values |
| Cycle Life | 4,000+ cycles* |
| Expansion | Parallel connection supported; confirm the permitted configuration in the product manual |
| Dimensions | 20.95 × 8.15 × 8.5 in (532 × 207 × 216 mm) |
| Typical Applications | RV, camper van, marine and off-grid power |
| Compliance Documents | Available according to the confirmed model and destination-market requirements |
*Cycle life depends on depth of discharge, charging method, operating temperature and test conditions. Use the current datasheet as the controlling specification.
The integrated Smart BMS manages charging and discharging while protecting the battery against overcharge, over-discharge, overcurrent, short circuit and temperature-related operating conditions. The 200A continuous-discharge rating supports higher-current systems when cables, terminals, fuses and connected equipment are correctly sized.
Bluetooth monitoring lets users and installers check available battery data without opening the battery compartment. Depending on the app and BMS configuration, information can include state of charge, pack voltage, current, temperature, cycle data and protection status.
Use a charger, solar charge controller or inverter-charger with a LiFePO4 charging profile. For alternator charging in an RV or camper van, a correctly sized DC-to-DC charger is normally required between the alternator and house battery.
Before installation, confirm:
Charging LiFePO4 cells below their permitted temperature can damage the battery. The low-temperature protection function is designed to stop charging when the cell temperature falls below the specified limit and allow charging again after the battery reaches its recovery temperature.
This is a protection function rather than internal self-heating. Confirm the exact charge cut-off, discharge cut-off and recovery temperatures in the current datasheet before designing a cold-weather system.
The battery is intended for deep-cycle house-power and auxiliary systems rather than automotive engine starting. Typical applications include RVs, motorhomes, camper vans, travel trailers, marine house banks, mobile workshops and small off-grid systems.
For marine installations, mount the battery in a protected location and use correctly rated marine cable, overcurrent protection, disconnect equipment and secure restraints. Avoid direct submersion and confirm that the enclosure rating suits the installation environment.
This 12V 200Ah lithium battery can be considered for compatible lead-acid replacement projects, but matching nominal voltage and capacity is not enough. The available space, terminal layout, charging equipment, expected load, cable size, fuse rating and operating temperature must also be checked.
LiFePO4 batteries generally provide more usable capacity and require less routine maintenance than comparable lead-acid battery banks. Actual runtime and replacement suitability depend on the complete system design and operating conditions.
Supply support is available for RV manufacturers, camper conversion companies, marine integrators, distributors and equipment builders. Send the application, installation dimensions, inverter power, charging method and expected order quantity for specification review.
Available OEM and project support may include:
Yes, when the available space, charging system, inverter demand, cables and circuit protection match the battery specification. It is intended for deep-cycle house-power and auxiliary loads rather than automotive engine starting.
Use a LiFePO4-compatible CC/CV charger with voltage and current settings that match the current datasheet. Alternator charging should normally use a correctly sized LiFePO4 DC-to-DC charger.
Parallel connection is supported when identical batteries are installed according to the product manual. Confirm the maximum permitted battery count, cable arrangement and protection requirements before installation.
No. This configuration uses low-temperature protection rather than an internal heater. Refer to the current datasheet for the exact cut-off and recovery temperatures.
Depending on the BMS and app version, available information can include state of charge, pack voltage, current, temperature, cycle data, operating status and protection records.
The stated cycle life is 4,000+ cycles under the applicable test conditions. Actual service life depends on depth of discharge, charging and operating temperature. Warranty terms are confirmed in the quotation for the ordered configuration and market.
Send the required quantity, application, inverter power, charging method and available installation dimensions. We can then review the configuration before providing the current datasheet, sample options, lead time and OEM quotation.
Many LiFePO4 batteries can replace compatible lead-acid deep-cycle batteries in RVs, boats, golf carts and industrial equipment. Before installation, confirm the system voltage, battery dimensions, terminal layout, charger profile, maximum load, cable size, fuse rating and operating temperature.
Most LiFePO4 batteries are compatible with standard 12V, 24V, 36V or 48V inverters when the system voltage and power requirements match. Many modern chargers also include a LiFePO4 charging profile. For lead-acid replacement projects, confirm the charger voltage, inverter rating and maximum load before installation. A compatible charger or DC-to-DC charger may be required if the existing charging equipment does not support LiFePO4 batteries.
Yes. OEM and custom battery support can include voltage, capacity, BMS settings, enclosures, terminals, connectors, communication protocols, labels and packaging. Send us the application, electrical requirements, installation dimensions and expected order quantity for review.
MOQ depends on the battery model, specification and customization requirements. Standard models may be available for sample testing, while custom enclosures, private labels and OEM production normally require a confirmed order quantity. Contact us with the model and required quantity for details.
Available certifications and documents depend on the battery model and destination market. Supporting documents may include UN38.3, MSDS, CE, RoHS and product test reports. Confirm the required documents and target market before placing an order.
Lead time depends on the battery model, order quantity, customization and testing requirements. Export shipping options are arranged according to the battery specification, destination and order volume. Send us the required quantity, delivery location and target schedule for a project-specific quotation.
