12V 100Ah Group 31 LiFePO4 Battery for Trolling Motors
$169.00
This 24V 100Ah LiFePO4 battery delivers 2,560Wh of usable energy for RV house power, marine electrical systems, 24V trolling motors and off-grid installations. Integrated Bluetooth monitoring gives operators a clear view of state of charge, voltage, current and temperature without opening the battery compartment.
A built-in 100A Smart BMS supports up to 2,560W of continuous output and protects the cells against overcharge, over-discharge, overcurrent, short circuit and abnormal temperature conditions. Low-temperature charging protection pauses charging below 0°C and allows charging to resume after the cells return to a safe temperature.
25.6V | 100Ah | 2,560Wh | 100A Smart BMS | Bluetooth Monitoring | Low-Temperature Charging Protection | IP65
With 100Ah capacity at 25.6V, this battery stores 2.56kWh in one 24V unit. It is suited to electrical systems that require longer runtime with fewer inter-battery cables than a two-battery 12V series bank. Typical uses include RV appliances, boat house loads, compatible 24V trolling motors, solar storage and truck auxiliary power.
This is a deep-cycle battery. It is not designed to start engines, power golf carts or replace a vehicle starter battery.
Bluetooth monitoring lets users check state of charge, battery voltage, current, power and temperature from a nearby phone. This makes routine checks easier when the battery is installed in an enclosed RV or marine compartment. App availability and supported data fields should be confirmed for the selected BMS before production.
The 100A battery management system supports 100A continuous charge and discharge current, with maximum continuous output of 2,560W. It monitors the battery against overvoltage, undervoltage, overcurrent, short circuit and high- or low-temperature conditions. System cables, fuses, disconnects and busbars must be selected for the actual load and installation standard.
When cell temperature falls below 0°C (32°F), the BMS stops charging to reduce the risk of cold-weather cell damage. Charging resumes when the cell temperature reaches 5°C (41°F) or above. Discharging is supported from -20°C to 60°C (-4°F to 140°F), subject to the system load and operating conditions.
This model provides low-temperature charging protection; it does not include self-heating.
The enclosure measures approximately 20.94 × 8.15 × 8.50in (532 × 207 × 216mm) and weighs approximately 43.67lb (19.81kg). M8 terminals support secure cable connections. Confirm the available compartment space, ventilation, cable bend radius and service access before installation.
One 25.6V battery can supply a compatible 24V trolling motor without placing two 12V batteries in series. The battery must be mounted in a dry, protected compartment and secured in a suitable tray. The positive cable should pass through a correctly rated fuse or circuit breaker and battery disconnect before reaching the motor or positive busbar.
Use a compatible 24V LiFePO4 charger with a CC/CV charging profile. The reference charging voltage is 28.8V ± 0.4V, with a recommended charge current of 20A. Solar panels must connect through a compatible MPPT controller, and alternator charging must use a properly configured DC-to-DC charger. Never connect an AC supply or unregulated energy source directly to the battery terminals.
For matched batteries of the same model, capacity, age and state of charge, the reference configuration supports up to four batteries in parallel and two in series (4P2S). A fully expanded bank can reach 51.2V 400Ah and 20.48kWh. Confirm the production BMS configuration before publishing or installing a multi-battery system, and use equal-length branch cables with individual protection for parallel banks.
| Cell Chemistry | LiFePO4 |
|---|---|
| Nominal Voltage | 25.6V |
| Rated Capacity | 100Ah |
| Rated Energy | 2,560Wh |
| BMS | 100A Smart BMS |
| Continuous Charge Current | 100A max. |
| Continuous Discharge Current | 100A max. |
| Continuous Output Power | 2,560W max. |
| Charge Method | CC/CV |
| Charge Voltage | 28.8V ± 0.4V |
| Recommended Charge Current | 20A |
| Charge Temperature | 0°C to 50°C / 32°F to 122°F |
| Discharge Temperature | -20°C to 60°C / -4°F to 140°F |
| Low-Temperature Charge Cutoff | Below 0°C / 32°F |
| Automatic Charge Recovery | At or above 5°C / 41°F |
| Terminals | M8 bolts |
| Protection Rating | IP65 |
| Housing | ABS |
| Approx. Dimensions | 20.94 × 8.15 × 8.50in / 532 × 207 × 216mm |
| Approx. Weight | 43.67lb / 19.81kg |
| Reference Expansion | Up to 4P2S with matched batteries |
Final specifications, certifications, Bluetooth functions, cycle-life claims and series/parallel limits must match the approved ZXBATT datasheet and production BMS before publication.
Yes, it can supply compatible 24V trolling motors within the battery's 100A continuous-discharge and 2,560W output limits. Confirm the motor manufacturer's voltage, maximum current and recommended circuit protection.
It can replace a compatible 24V lead-acid bank when voltage, capacity, discharge current, charger settings, compartment size and system protection are all suitable. Verify the complete electrical system before replacement.
No. It includes low-temperature charging protection, which pauses charging below 0°C. It does not heat the cells.
Use a 24V LiFePO4 charger with a CC/CV profile and a charging voltage within the approved range. A 20A charger is the reference recommendation; confirm the final datasheet before selecting equipment.
The reference configuration supports up to 4P2S using matched batteries. Only connect batteries with the same model, capacity, production batch, age and state of charge, and follow the approved wiring diagram.
No. This is a deep-cycle battery for auxiliary and house-power loads. It is not designed for engine starting.
For RV, marine, truck auxiliary and off-grid projects, configuration options may include enclosure labeling, Bluetooth BMS settings, terminal layout, cable assemblies, packaging and technical documentation. Final options depend on engineering review and production requirements.
Many LiFePO4 batteries can replace compatible lead-acid deep-cycle batteries in RVs, boats, golf carts and industrial equipment. Before installation, confirm the system voltage, battery dimensions, terminal layout, charger profile, maximum load, cable size, fuse rating and operating temperature.
Most LiFePO4 batteries are compatible with standard 12V, 24V, 36V or 48V inverters when the system voltage and power requirements match. Many modern chargers also include a LiFePO4 charging profile. For lead-acid replacement projects, confirm the charger voltage, inverter rating and maximum load before installation. A compatible charger or DC-to-DC charger may be required if the existing charging equipment does not support LiFePO4 batteries.
Yes. OEM and custom battery support can include voltage, capacity, BMS settings, enclosures, terminals, connectors, communication protocols, labels and packaging. Send us the application, electrical requirements, installation dimensions and expected order quantity for review.
MOQ depends on the battery model, specification and customization requirements. Standard models may be available for sample testing, while custom enclosures, private labels and OEM production normally require a confirmed order quantity. Contact us with the model and required quantity for details.
Available certifications and documents depend on the battery model and destination market. Supporting documents may include UN38.3, MSDS, CE, RoHS and product test reports. Confirm the required documents and target market before placing an order.
Lead time depends on the battery model, order quantity, customization and testing requirements. Export shipping options are arranged according to the battery specification, destination and order volume. Send us the required quantity, delivery location and target schedule for a project-specific quotation.
