12V 100Ah Group 31 LiFePO4 Battery for Trolling Motors
$169.00
1800W 1024Wh LiFePO4 portable power station with 3600W peak power, pure sine wave AC output, UPS support and up to 800W solar charging. Designed for RV travel, camping, emergency backup, off-grid power, outdoor work and other higher-demand portable power applications.
| 1024Wh LiFePO4 Battery | 1800W Rated AC Output | 3600W Peak Power | 800W Max Solar Input |
Need less power or a lighter portable unit? Compare our 600W 512Wh LiFePO4 Portable Power Station for lower-demand camping, travel and backup applications.
This 1800W 1024Wh LiFePO4 portable power station is designed for applications that require more power and battery capacity than compact portable power stations can provide.
With 1800W rated AC output and up to 3600W peak power, it can support a broad range of compatible electrical equipment used in RVs, campsites, homes, workshops and off-grid environments.
The pure sine wave inverter provides stable AC output for compatible electronics and appliances such as laptops, TVs, refrigerators, coffee makers, lighting, portable coolers, cameras, fans and other everyday electrical equipment.
Recharge the portable power station from AC power, a vehicle or solar panels depending on where the system is being used.
| AC Charging Up to 1300W | Car Charging 120W Max | Solar Charging 800W Max |
The high-power 800W solar input makes this portable power station suitable for RV, camping and off-grid solar applications where grid power may not be available.
AC charging includes Quick, Normal and Silent charging modes, allowing the charging method to be selected according to the application.
Multiple output interfaces allow different compatible devices to be powered or charged from one portable energy system.
The 100W USB-C PD output can be used with compatible USB-C laptops, tablets, smartphones and other Power Delivery devices.
The built-in UPS function adds backup power capability for compatible equipment during power interruptions.
This makes the power station suitable for emergency backup, home power outages, mobile workstations and other applications where temporary backup power may be required.
An integrated LED light provides High, Medium, Low and SOS modes for camping, emergency lighting and blackout situations.
| Battery Material | LiFePO4 |
| Battery Capacity | 1024Wh / 320,000mAh |
| Rated Power | 1800W Max |
| Peak Power | 3600W Max |
| AC Output Voltage | 110V ±10% or 230V ±10% |
| Output Frequency | 60Hz ±5% or 50Hz ±5% |
| Output Waveform | Pure Sine Wave |
| AC Charging |
AC 200–240V / 7A Bidirectional Inverter: 1300W Max |
| Car Charging | DC 12.5V–15V / 8A, 120W Max |
| Solar Charging | DC 16V–75V / 25A, 800W Max |
| USB Output | 2 × USB-A 18W Max + USB-C PD 36W + USB-C PD 100W Max |
| DC Output |
1 × Cigarette Lighter + 2 × DC5521 Rated Output: 13.8V / 10A Max |
| Quick AC Charging | Approx. 1 Hour |
| Normal AC Charging | Approx. 2 Hours |
| Silent AC Charging | Approx. 4 Hours |
| UPS Function | Supported |
| LED | 3 Levels (High / Medium / Low) + SOS |
| Dimensions | 349 × 260 × 265 mm |
| Weight | Approx. 11.7 kg |
The combination of 1800W AC output, 1024Wh LiFePO4 battery capacity and solar charging support makes it suitable for a wide range of portable and backup power applications.
Typical compatible loads may include laptops, phones, TVs, refrigerators, mini coolers, coffee makers, lighting, cameras, drones, fans and projectors.
Actual runtime depends on connected device power consumption, startup load, operating conditions and power conversion efficiency.
A 1024Wh portable power station is a strong all-in-one solution when the priority is portability, fast setup, built-in AC output and flexible charging from AC, vehicle or solar.
A fixed LiFePO4 battery bank becomes more suitable when the application needs permanent installation, multi-day runtime, higher total battery capacity, alternator or DC-DC charging, larger solar arrays or integration with an existing RV, marine or off-grid electrical system.
| Application | 1800W 1024Wh Portable Power Station | Fixed LiFePO4 Battery Bank |
|---|---|---|
| Best for | RV travel, camping, backup, mobile work | Permanent RV, marine and off-grid electrical systems |
| Stored energy | 1024Wh | Example: 24V 50Ah LiFePO4 = 1,280Wh nominal energy; larger banks can be sized to the application |
| AC power | Built-in 1800W pure sine wave inverter | External inverter selected for the required system load |
| Solar charging | Up to 800W input | Solar controller and array sized for the installed system |
| Vehicle charging | Car charging supported | Alternator / DC-DC charging can be designed into the system |
| Lead-acid replacement | Not a direct replacement for an installed house battery bank | Can replace compatible AGM, gel or flooded lead-acid systems after compatibility review |
For a simple capacity reference, a 25.6V 50Ah LiFePO4 battery stores 1,280Wh of nominal energy, compared with 1,024Wh in this portable power station. The energy figures are close, but the system architecture and intended use are different.
Nominal Wh is a capacity comparison only. Actual usable AC runtime depends on inverter efficiency, system losses, load profile, battery settings, temperature and operating conditions.
Even when stored energy is in a similar range, the two solutions serve different roles. A portable power station combines the battery, inverter and charging electronics in one movable unit. A fixed battery bank is designed around the vehicle or off-grid system itself.
A 1024Wh power station covers many demanding portable applications, but a fixed battery system should be considered when you need:
For installed solar applications, see our Off-Grid Solar LiFePO4 Battery Solutions .
It uses a 1024Wh / 320,000mAh LiFePO4 battery, providing a larger energy reserve for portable, RV, backup and off-grid applications.
The unit provides up to 1800W rated AC output and 3600W peak power. Always check both continuous power consumption and startup demand before connecting an appliance.
Yes. The AC inverter provides pure sine wave output.
Yes. Solar charging supports DC 16V–75V / 25A with up to 800W maximum input power. Actual solar charging performance depends on panel output, sunlight and operating conditions.
Reference charging times are approximately 1 hour in Quick mode, 2 hours in Normal mode and 4 hours in Silent mode. Actual charging time may vary according to input power and operating conditions.
Yes. A built-in UPS function is included for compatible backup power applications.
The USB outputs include a USB-C PD 100W port and a USB-C PD 36W port. Compatible USB-C laptops, tablets and other PD devices can be charged according to their supported charging specifications.
The specification supports 110V ±10% or 230V ±10% AC output configurations with 60Hz or 50Hz options. Confirm the required voltage, frequency and socket configuration before ordering.
OEM, wholesale and private-label requirements can be reviewed according to the required configuration, destination market and order quantity. Submit your project requirements through our OEM and wholesale quotation page .
Choose the portable power station when you want a movable all-in-one system with a built-in inverter, AC charging, solar input and multiple outputs. Choose a fixed LiFePO4 battery bank when the application requires permanent installation, more total energy, alternator or DC-DC charging, or integration with an RV, marine or off-grid electrical system.
Not as a direct replacement for an installed RV house battery bank. A lead-acid-to-LiFePO4 conversion should be reviewed against the inverter, charger, alternator or DC-DC charger, solar controller, cables, fuses, battery dimensions and required current.
If portability is still required, select a higher-capacity portable unit. For a permanently installed system, size a LiFePO4 battery bank from the actual daily energy use, inverter load, charging sources, peak current and required reserve.
For 1800W 1024Wh portable power station requirements, send us your required AC voltage, socket type, destination market, estimated order quantity and OEM or private-label needs.
If you are upgrading an RV, marine or off-grid system from AGM or lead-acid to LiFePO4, include the existing battery details, required runtime, inverter or equipment load, charging sources and installation space.
Request a Quote Explore Lead-Acid Replacement Technical SupportLearn more about our OEM and ODM battery services , LiFePO4 battery manufacturing and quality control , or browse our technical battery resources .
Many LiFePO4 batteries can replace compatible lead-acid deep-cycle batteries in RVs, boats, golf carts and industrial equipment. Before installation, confirm the system voltage, battery dimensions, terminal layout, charger profile, maximum load, cable size, fuse rating and operating temperature.
Most LiFePO4 batteries are compatible with standard 12V, 24V, 36V or 48V inverters when the system voltage and power requirements match. Many modern chargers also include a LiFePO4 charging profile. For lead-acid replacement projects, confirm the charger voltage, inverter rating and maximum load before installation. A compatible charger or DC-to-DC charger may be required if the existing charging equipment does not support LiFePO4 batteries.
Yes. OEM and custom battery support can include voltage, capacity, BMS settings, enclosures, terminals, connectors, communication protocols, labels and packaging. Send us the application, electrical requirements, installation dimensions and expected order quantity for review.
MOQ depends on the battery model, specification and customization requirements. Standard models may be available for sample testing, while custom enclosures, private labels and OEM production normally require a confirmed order quantity. Contact us with the model and required quantity for details.
Available certifications and documents depend on the battery model and destination market. Supporting documents may include UN38.3, MSDS, CE, RoHS and product test reports. Confirm the required documents and target market before placing an order.
Lead time depends on the battery model, order quantity, customization and testing requirements. Export shipping options are arranged according to the battery specification, destination and order volume. Send us the required quantity, delivery location and target schedule for a project-specific quotation.
