12V 100Ah Group 31 LiFePO4 Battery for Trolling Motors
$169.00
The 12V 230Ah LiFePO4 battery stores 2,944Wh in a single deep-cycle battery for compatible RV, camper van, marine and off-grid power systems. Bluetooth monitoring allows users and installers to check operating data from a compatible mobile device, while the integrated Smart BMS manages essential battery protection.
For lead-acid replacement projects, the battery configuration should be checked against the existing charger, inverter, maximum load, cable size, fuse rating, installation dimensions and operating temperature before installation.
12.8V | 230Ah | 2,944Wh | Bluetooth Monitoring | Smart BMS | 4,000+ Cycles
| Feature | Product Detail |
|---|---|
| 230Ah LiFePO4 Capacity | Provides 2,944Wh of stored energy for compatible mobile and deep-cycle power systems. |
| Single-Battery Configuration | Reduces the number of battery-to-battery connections compared with a multi-battery bank of similar capacity. |
| Bluetooth Monitoring | Displays available battery voltage, current, state of charge, temperature and operating status through a compatible app. |
| Smart BMS Protection | Manages overcharge, over-discharge, overcurrent, short-circuit and temperature protection. |
| Deep-Cycle Operation | Designed for repeated charge and discharge operation in compatible RV, marine and off-grid systems. |
| OEM Options | Selected configurations can support custom BMS settings, communication, labels, terminals and packaging. |
A 230Ah battery provides a practical balance between energy capacity and installation space for RV house-power systems. It can support compatible lighting, refrigeration, pumps, electronics and inverter-powered equipment when the battery, inverter and protection system are correctly sized.
Final battery selection should be based on the continuous and peak load, required operating time, inverter rating, charging sources and available battery-compartment dimensions.
This 12V 230Ah LiFePO4 battery can be considered for replacing a compatible 12V lead-acid house-battery bank. A lithium conversion should not be based on voltage and amp-hour capacity alone.
Before installation, confirm:
LiFePO4 technology generally provides more usable capacity, lower routine maintenance and a longer cycle life than a comparable lead-acid battery bank. Actual performance depends on system design, load, charging settings, temperature and operating conditions.
The battery can be evaluated for compatible RV, camper van, marine house-power and off-grid installations. System integration may include an inverter, AC charger, solar charge controller, DC-to-DC charger, battery monitor, fuse, disconnect switch and distribution busbars.
Equipment compatibility must be confirmed from the electrical specifications rather than the equipment brand alone. Charging voltage, current limits, communication protocol and cable pinout should be reviewed before commissioning.
Bluetooth monitoring provides convenient access to available battery operating information during installation, daily use and troubleshooting.
Optional CAN or RS485 communication may be available for selected OEM configurations. Protocol compatibility and cable pinout must be confirmed for the connected inverter, monitor or energy-management system.
| Parameter | Specification |
|---|---|
| Battery chemistry | Lithium iron phosphate (LiFePO4) |
| Nominal voltage | 12.8V |
| Rated capacity | 230Ah |
| Rated energy | 2,944Wh |
| Battery management | Integrated Smart BMS |
| Monitoring | Bluetooth mobile app |
| Communication | CAN or RS485 optional on selected configurations |
| Cycle life | 4,000+ cycles under specified test conditions |
| Series and parallel use | Confirm the approved configuration for the selected model |
| Typical applications | RV, camper van, marine house power and compatible off-grid systems |
Final specifications, BMS current, dimensions, weight, charging parameters, connection limits and available documents must be confirmed against the approved product datasheet before ordering or system integration.
With more than 20 years of battery manufacturing experience, we support battery brands, RV manufacturers, marine companies, distributors and system integrators with product evaluation, sample development and volume production.
Available OEM options can include:
It can be suitable for an RV house-power system when its capacity, discharge capability, dimensions and charging requirements match the inverter, appliances, charging sources and available installation space.
It can replace a compatible 12V lead-acid house-battery bank after the charger, inverter, alternator or DC-to-DC charger, cables, fuses, terminals, battery dimensions and operating temperature have been checked.
Only if its charging voltage, current and charging profile are suitable for the battery specification. Equalization and unsuitable lead-acid charging modes should not be used unless specifically approved.
A compatible app can display available state of charge, battery voltage, current, temperature and operating or protection status.
CAN or RS485 may be available for selected configurations. The communication protocol, firmware and cable pinout must be confirmed for the connected equipment before installation.
Only use a series or parallel arrangement approved for the exact battery model and Smart BMS configuration. Batteries should have the same model, specification, state of charge and compatible production configuration.
Send us your application, inverter power, continuous and peak load, charging sources, available installation dimensions, communication requirements, destination country and estimated order quantity. Our team will review the proposed 12V 230Ah LiFePO4 battery configuration.
Many LiFePO4 batteries can replace compatible lead-acid deep-cycle batteries in RVs, boats, golf carts and industrial equipment. Before installation, confirm the system voltage, battery dimensions, terminal layout, charger profile, maximum load, cable size, fuse rating and operating temperature.
Most LiFePO4 batteries are compatible with standard 12V, 24V, 36V or 48V inverters when the system voltage and power requirements match. Many modern chargers also include a LiFePO4 charging profile. For lead-acid replacement projects, confirm the charger voltage, inverter rating and maximum load before installation. A compatible charger or DC-to-DC charger may be required if the existing charging equipment does not support LiFePO4 batteries.
Yes. OEM and custom battery support can include voltage, capacity, BMS settings, enclosures, terminals, connectors, communication protocols, labels and packaging. Send us the application, electrical requirements, installation dimensions and expected order quantity for review.
MOQ depends on the battery model, specification and customization requirements. Standard models may be available for sample testing, while custom enclosures, private labels and OEM production normally require a confirmed order quantity. Contact us with the model and required quantity for details.
Available certifications and documents depend on the battery model and destination market. Supporting documents may include UN38.3, MSDS, CE, RoHS and product test reports. Confirm the required documents and target market before placing an order.
Lead time depends on the battery model, order quantity, customization and testing requirements. Export shipping options are arranged according to the battery specification, destination and order volume. Send us the required quantity, delivery location and target schedule for a project-specific quotation.
